Order of Magnitude · Machine Classification & Employment Directorate

Automated Status Verification

Applicant suitability test 11K · precision manipulation assessment

Prove you are a robot

Move the supplied component into the receiving aperture. Align its reference point within 0.8 px of the target centre and its orientation within ±0.4°.

The Directorate recognises no distinction between “basically centred” and “centred”.

Position tolerance: ≤ 0.8 CSS px Angular tolerance: ≤ 0.4° Reference point: component centre cross Rotation: clockwise degrees Drag the component directly. Match the receiving aperture visually; its exact orientation is deliberately not numerically disclosed. Use coarse or fine rotation controls, then press INSPECT PLACEMENT.
DIRECTORATE PRECISION FITTING BENCH / PF-11JOB PENDING
RECEIVING APERTURE
Current orientation000°
Required orientationOPTICAL
Component issued. Dimensional inspection pending.
Repeated nudging after an unsatisfactory inspection will be recorded as CRAFTSMANSHIP. Numerical disclosure of the target orientation is not available.
Precision placement required
Archive note: Surviving records indicate that human candidates frequently protested that the component was “obviously in the hole”. Dimensional inspection did not support this assessment.